HOW TO FIX ANDROID PHONE CHARGING PORT | NOT CHARGING | | LOOSE PORT MIA1 By RoyTecTips

Hey guys welcome to another video, and today, I have a phone. This is show me, am IA on phone, and it's charging port is USB 3 port, but now we have a problem. Whenever we want to charge it is continuously charging and discharging so to do this video. We try to fix this loose, USB port and hope it works. So, let's start it to open the phone from the bottom will be up to screw on to open this. We need a 0.85, be screwdriver. Next use the same now, using a prayer tools, remove the back cover and make sure you turn off the phone before opening the phone, so I forget it, and I'm turning off the phone out of shutdown, snowboard off yeah, it's been the rack cover, and this is the battery connector, remove it okay, removed and the bottom side.

We have this headphone jack charging, port and I speaker. This is the vibrator now chew. So now we have one two, three, four five total five screw. So we need to open. It.

I think it's flips ad screw! These two escrow is little bigger. So be careful next day we put some pressure, and it will open the speaker and the vibrator module, and here is the charging port. So it's connected with the connector and here is the antenna connected. So just remove it be careful, it's fragile gates, open. This is the headphone jack, and this is the charging port, and here you see there is so many tiny, tiny connector because of continuous plug and unplug of the charging cable.

This connector gets D solder from the board. There's the reason for this charging failure. Now, as it is, charging I think there is problem with this. With this holder, you guys can buy this kind of USB connector from AliExpress, pretty cheap, it's costing about a dollar, and you can buy a complete board. This PCB full port.

So if you are planning to replace this at your own at your home, I recommend you to buy it from AliExpress. This complete board also I, think this is available on Amazon India, it's 300, rupees and AliExpress. It's around 200 something and if you go to service center, they probably excited to 1500 rupees $20 minimum for replacing this board. So it's a good idea. If you have some tools, and you want to fix your own phone after years of charge, this thing it really looses like these loose.

So what you can do you can use this kind of clear and little if pressure it so that this charging port become tight. Now it's tied start moving. So this way as some time it works so better. It's better to replace this discharging coat as I. Don't have one that's the reason I am trying on.

If it is or I, don't need to buy this whole board so now time to put everything together and see the mobile phone is charging, but what you are not connect the battery connector. Let's try to charge and see what happened. Yeah, I was charging I was charging and port is tight. Light is still on so guys. That is how you can fix your mobile phone charging port.

Basically, USB Cone- and this is not recommended guys- just buy one- these replacement parts and change it. This will be the best option now, unplug it and screw everything. Now everything is screwed connect the battery connected again connected okay cover it. Now you guys want to save your charging port from frequent plug and unplug. You can use this kind of magnetic cable.

These awesome just plug it and when it's charged down just move it, so it will not damage the charging port so guys, that's it for today hope you guys learned something and if you guys have any question insights on the late me know in the comment section below I definitely answer every one of your question and you guys don't know what you were doing. Please don't try to repair your phone at your home service. Let me say my name is Vijay. Chain signing out meet with you on my next video till then bye, bye,.

Source : RoyTecTips