Inside Xiaomi Mi 11 Lite | Teardown By Geardo

Hi everyone, Welcome back to geardo, Today we will show you how to teardown or disassemble the Xiaomi Mi 11 Lite Mobile phone for repairs. To start, we need to have the right tools to proceed with the teardown, which You can find in the description. First, turn off the phone, take out the Sim tray, and then follow the back cover removal. To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft. For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes.

Alternatively, you can use a heat gun or hairdryer. Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover. Take out the rear cover and remove the logic board frame by undoing 11 screws. Next, disconnect the battery connector, disconnect, & take out the front camera on the top right.

Next, disconnect and take out three rear cameras by the top left in the logic board. Next, apply little heat and take out the Flash Cable. Next, take out the logic board by undoing two antennas and unplugging four connector plugs in the logic board. Now, gently pull out the logic board by using a tweezer. Next, apply little heat and take out the vibrator motor and earpiece from the body.

Next, move to the bottom part and undo four screws to take out the sim card flex. And then undo three more screws to take out the speaker buzzer module. Next, disconnect the main ribbon flex. Next, apply little to soften the glue on the LCD connector plug. And then take out the charging port flex and two antennas with the board.

Next, take out the battery by loosening the adhesive. First, loosen the glue on both sides, and then pull it by the tab. Be gentle and lift the battery. Next, move the battery protective tape to the left-hand side and pull out the main ribbon and lcd flex cable from the body. Finally, take out the Power button with fingerprint sensor flex and Volume button & flex from the body.

Stay tuned for the reassembly process. I hope you have enjoyed the teardown guide for repairs on mi 11 lite. Let us know if you have any questions; please like, share, and comment on our videos. DO not forget to hit the subscribe button.

Source : Geardo