SAMSUNG A8 BATTERY REPLACEMENT with ENGLISH SUBTITLE By fahmi nik mat
IN THIS VIDEO WE WILL SHOW HOW TO REPLACE SAMSUNG A8 BATTERY.1ST OF ALL WE NEED TO PUT SOME ZIPPO LIQUID TO MAKE IT EASY TO REMOVE THE GLUE. AFTER A FEW SECOND, WE USED THIN PIT METAL TO MAKE SOME GAP BETWEEN LCD AND THE BODY. THIS WILL HELP US FOR THE NEXT STEP. WHILE WE CAN SEE THE GAP, WE PUT THE CARD INSIDE IT. NOW WE CAN MOVE THE CARD INSIDE OUT TO CUT THE GLUE. BECAREFUL.
WE NEED TO KNOW THE RIBBON POSITION. SO WE NOT BROKE THE RIBBON. NOW WE CAN SPLIT THE LCD FROM THE BODY FROM BELOW TO THE TOP OF LCD. HERE WE NEED TO BE VERY CAREFUL. TO MAKE SURE THE LCD RIBBON SAFE.
THEN WE CAN REMOVE THE LCD CONNECTOR PIN. AND TAKE OUT THE LCD. NOW WE CAN START REMOCE THE SCREW. THIS IS ALSO IMPORTANT PART FOR ALL FIX&FON STAFF. WE WILL WE WILL MAKE SURE ALL THE SCREW PUT IN THE RIGHT PLACE AS ORIGIN.
SO NOW WE CAN REMOVE THE SIM TRAY AND MEMORY SLOT. THEN WE NEED TO REMOVE THE MIDDLE BODY. NOW WE CAN SEE THE BATTERY. TO REMOVE THE BATTERY, WE NEED TO REMOVE THE GLUE FIRST. AS USUAL, WE USE ZIPPO LIQUID.
AFTER A FEW SECOND WE CAN START REMOVE THE BATTERY. USING THE THIN METAL PIT. NOW WE CAN PUT THE NEW BATTERY =) MAKE SURE THE PIN CONNECTED AND WE CAN TEST. CONNECT THE LCD AND SHORT THE SWITCH PIN TO SWITCH ON THE PHONE WHEN THE PHONE WORKING, WE SHOULD TEST CHARGE THE BATTERY FOR A FEW MINUTES. TO CHECK THE BATTERY FUNCTION.
BESIDE WE CAN ALSO TEST THE LCD WORKING WELL OR NOT. THEN WE CAN TURN OFF THE PHONE TO START RESEMBLE AS USUAL, WE PUT ALL THE SCREW BACK TO ITS OWN POSITION. MAKE SURE TO GLUE BACK THE LCD TO THE BODY. THE BEST WAY, USE THE GLUE. AVOID TO USE THE DOUBLE TAPE.
THEN PUT THE SIM & MEMORY TRAY AFTER THAT WE CAN CLAMP THE LCD TO THE BODY FOR 2 HOURS. THANKS FOR WATCHING. DO NOT FORGET TO... SUBSCRIBE SUBSCRIBE.
Source : fahmi nik mat
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
