Samsung A10 Stuck At Logo By MST

By MST
Aug 21, 2021
0 Comments
Samsung A10 Stuck At Logo

Hello everyone: today we have Samsung a10 stuck at logo after dropping water. It's stuck at logo. Look at the back camera, there's water inside it. So let's open it's important to remove the SIM card slot before you doing anything. Otherwise, we'll make damage. There is no hit in the screen and there is no hit in the back glass.

There is no bang glass. It's from plastic unblock their battery. Okay. What we are going to do is to lock follow after the missiles to see if any pieces get in water, so we are going to clean it. The flex cable nut into water.

There is no water into it. So let's continue this flex. Cable is fine. There is nothing in it. Continue removing now remove charging board to see under it.

If there is any leak on water, there is no leak to the charging board. It's alright! Let's continue! Now we can see some water into the airport, the main board, so remove all pieces and then start clinic. This is the first phase we can start cleaning. Then we can test. If the problem consists, we are going to put the board into machine to remove all the water get leaked into it, clean the ball and then draw it using the hitter.

Okay, you can judge the situation by looking at the board. You can see if there is too much water leak inside or not. If you think there is too much water leak inside, you need to both the whole board into machine to get it dry. This board wasn't looking very bad situation, so the cleaning I think will be enough for it, and then I will test it to make sure everything is a good owner. Lets noticed it power on the device and take a look, the device didn't power on.

So maybe there is no battery. Let's now check the battery, get your multimeter and check the battery voltage. There is no battery. Let's now board the charging world and charge the device then powered on, but that charger on. Let's wait a few seconds, then we will power it on mobile device on and test the device.

Now walks successfully. Now we can assemble the device. There is a tip for everyone. Anyone who drops this phone into water, it's better, to take it to the nearest maintenance shop, otherwise it will be difficult to be rebuilt. The faster is that better.

Now we can let you with the video. You can just see what we tear down, and now we are going to assemble it. That's it, thank you for watching. If you have any question, please write it below, and I will answer it as soon as possible. If you liked my video subscribe now, we will see you in the next video ciao you.

We want to thank me by life and subscribe click that ring to get all my videos stay tuned or the next table.


Source : MST

Phones In This Article


Related Articles

Comments are disabled

Our Newsletter

Phasellus eleifend sapien felis, at sollicitudin arcu semper mattis. Mauris quis mi quis ipsum tristique lobortis. Nulla vitae est blandit rutrum.
Menu