How To Fix A Galaxy Tab S6 That Won’t Turn On After Android 10 By TheDroidGuy

This video will show you what to do if your Galaxy Tab s6 powered down and would no longer turn on some tab. S6 owners reported that their devices power down and won't turn on or respond anymore after the android 10 updates. It is a possible firmware issue and, if you're, one of the people bugged by this problem, here's what you need to do. First solution perform the forced restart when it comes to fixing issues that occurred out of the blue without any obvious cause. The best thing that you can do is to refresh the memory of your device. You can do that by performing the forced restart procedure.

It is like a battery pulled to devices with non-removable batteries in the case of the Galaxy Tab s6. What you have to do is the following press and hold the volume down button and the power key for 10 seconds. This will trigger the device to turn off and power back up once the tab, s6 logo shows on the screen release both keys. Your tablet will continue the usual boot process again, provided that this problem isn't caused by physical or liquid damage. The forced restart should be able to make it respond again.

In fact, the moment the logo shows on the screen is a sign that the problem is already fixed. However, if your device doesn't respond to the procedure, try doing it a few more times if it still won't turn on then try doing the next solution. Second solution charge it and do the forced restart while charging after doing the first solution and your Galaxy Tab, s6 is still not responding or turning on then it's possible that the battery was completely drained. While it may not be a serious issue if the juice runs out, there are times when the firmware crashes, just before the tablet shuts down, as some services may not be closed properly. Here's what you should do plug the charger to a working power outlet, use the original cable to connect your tablet to its charger, regardless of whether the device shows the charging sign or not, leave it connected to the charger for at least five minutes.

This should give it time to charge the battery to a certain percentage after that press and hold the volume down button and the power key, while the device is still connected to the charger most of the time. This should be enough to fix the problem. However, if your Galaxy Tab, s6 is still not turning on even after doing these procedures, then it's time that you had. It checked it's possible that there's an issue with the hardware. I hope that this simple troubleshooting guide has been helpful one way or the other.

Please support us by subscribing to our channel and don't forget to enable the notifications thanks for watching you.

Source : TheDroidGuy