Friends, this is our Samsung mobile phone. This mobile phone have a problem whenever I connect charger, it shows charging symbol on screen, but actually this device did not charge at all. If I leave it for an R, it will remain same as we will tell you the solution of this problem. So to solve this problem, you have to remove power and take out its battery. This is a Samson moon one, but you have to do this stuff with all the mobile phones that you have. You can do it with all your mobile phones take a USB cable.
This is our USB. Cable I have got it from here, but you have to cut it at the end, because I want to show you part is in exactly I, am I doing, so I have to cut it a very little distance. You have to remove its cover by cutting from one side. I am cutting its upper surface, and I am taking four wires inside every USB. Cable has four wise.
You can see every usable have four words: red green white and black. You have to the Lord that the crowd only fellows in black and red wire. These two words are only for data, so I have to conduct the current only flows on these two wires. You know that red is always positive and black is always negative and remove the insulator from both wires watch on your battery. You can see this point is positive because there is written positive, and this point is negative- now take in charger, insert USB, cable and turn around these wires, so it keeps at one place.
It's all here remain with each other. Now tip your battery. You have to put your red wire on positive and black wire on negative. You see as I put these wires. My charger light turns to that.
That means it is properly connected. You have to keep a hand on it, keep it for some time for five minutes. It is enough, but you have to keep in mind that you are wires, are not shorting after five minutes, remove your hand and remove the battery now put your battery again into your mobile phone and turn it on. You can see over my Lee's turn down dear friends. Thank you very much for watching.
Source : Majid Goraya