Spigen Samsung Galaxy A50S / A50 / A30S / A30 Tempered Glass Screen Protector By Ashutosh Thakur

Hello friends today, I'm going to show you the sign align master tempered glass for your Samsung Galaxy, a 30, a 50, 30 years, a 50 s, and so on that are all 6.3 inch displays. So this is a speaking original material that comes with a line master. As you can see, this is the land master and this is the class. So it is a basic, basically very easy process to install your tempered glass at home without needing of any professional help. So it is silicone. Full ratio, like the whole display, will be getting the full protection and the whole display will add air with Edison like, as you can see, I have used small some other tempered glass here.

It is a very cheap one, as you can see here, and this comes in only six hundred seven hundred rupees. But here you can see it is mentioned like two thousand five hundred rupees, but you will get in a good deal if you buy it from Amazon India, and it has got very delicate touch so basically, in this cheap temperate glasses. What happens? Your touch response is going out very less. Like you have to tap a lot of times, but here it will walk just like you are not using any tempered glass, and it has got oleo phobic coating, so it will also not get a lot of fingerprints on the display, and it is the real glass it is mention original glass, and also it is 9h hardness protection. So, if I wet my friends, let's open this up and check it out what we get inside so as you can see, the box is totally sealed.

Here you have to tear here, I, think I. Suppose, yes, we have to — seems you in the Box. We get the usual things for this installation process. I! Think, let's see this is the tempered glass that is inside this covering yes, this is the tempered glass, as you can see here. It is mentioned here.

This is the tempered glass, so we will keep it very safely. This idea, because no dust should go under this display- will keep this aside. Then we get some installation instructions here, so how to align, how to plate and how to place the tempered glass and how to use everything. Keep this aside and last, but not the least, the cleaning materials and the accessories that are used for this process. So today, my friends, I, will also show you how to install this tempered glass on Samsung Galaxy, a 15, and, let me repeat one more time: you can use this same temperature loss.

Also, on your Samsung Galaxy. A 3830 is a 50, a 50 s, so all phones are the same process. So let me start this up. So as always, first we have to clean the display, as you can see, I have already removed the old tempered glass that I was using on this phone, so I have removed that make sure to use like a soft surface so that you don't scratch your back, just keep it on top of it. This like this now we will open this up check what you get inside here.

This is a squeeze to squeeze out all the bubbles when you have, while installing the display- and this is the cleaning wipe that we get here. This is the plating cloth and this is the dust removal sticker, and this is how we have to squeeze out all the bubbles. If we, it is formed okay, and if you scan this QR code, you will also get the video on YouTube how to remove the bubbles Thank You speaking. So why wait? Let's click this surface up, so you should take care about good watch for any dust particles here, it's better I. Should they do the process all the process again and again, because it is good for the installation process at all.

So, first, we should use this cleaning wipe. It is alcohol wipe. So, as you can see, give it a good clean here. So if you want to reuse it during this process, just keep it inside this pouch so that it won't get vaporized because alcohol vaporizes very fast. So, as you can see here, the glass is totally clean.

Now, so we will go to the next step, we'll clean with this dust removal sticker. You will take this big one. Just wait a minute, so use the sticker to remove all the dust particles that is left here. While doing these all process do clean your hands, don't use any fan or AC in that room while you're doing this, because any of the dust particle may go inside the display, if anything, any air is moving inside the room. Okay.

So let's check this out, it is totally clean now. So the next step is, you have to install this. On top of you, so be very careful about this process. First, on the top, then, on the below, you know to hold the phone really firmly and push it down. It has done.

As you can see, the phone is totally fixed here, be very careful about it. Okay, so give it a look again. If there is a red dust particles here, MMM there is none, so settle it down now very carefully. We will remove this tempered glass out of its protective layer before that give another look before. If you have a retest particle below here, then you won't be able to recover it again.

So, while removing do all this, keep this face down because North Nun dust particles should go inside you, okay, that is done. I will give another look here. So no dust particles you, so now we will keep this glass on top of here, like this, be very gentle to it. Okay, so it aligns automatically. As you can see you, so it is aligned now perfectly aligned.

Then, when you get this, it is aligned perfectly. Then just you need to do. Is press here and slide it down and the glass gets automatically Ida. As you can see, you give it a few minutes just a few seconds. Maybe and then you can push if you're feeling that there are any bubbles inside here then very carefully.

Remove the phone and use this squeezing to squeeze out if any of the bubbles are the earth. As you can see, there is a bubble here. There is a bubble here, so we will use this squeeze to squeeze out any bubbles left over here. So it is a very simple and easy process as compared to the other processes. I find it very easy because sign has given a good thing.

The EZ align master is a very good thing. Also, I have made a video for iPhone. If you have checked on my channel. That is also very good thing. I thought is really easier than this one I think in this process.

We are taking a lot of time to do this, but so it is always from inside to out you can remove the sticker, now be very gentle about it. Now use this squeeze push it from into out. So, as you can see, it is installed now, or that is one small bubble here, but it will go away very soon, because I haven't pressed it in a very good way, and if there is some dust particles inside here they might cause the bubbles too. So, as you can think about what has gone, there's no bubble here now, I will switch on the four I'll. Show you how it looks in the meantime.

Let me show you. It also works with this case, so we will put this case. Let me clean this back using this soft cloth. You and if you want it would clean, then you can also use this alcohol wipe it doesn't affect the color. Don't worry so after a good clean.

We will put this inside here. Also, I will clean this one because I had kept this somewhere. So as you can see, it works with this case perfectly and the tempered glass doesn't move up or down. So the phone is on now you can see the clear thing and that response is really nice. So, as you can see, the test touch response is really nice.

So that's all my friends. Thank you for watching. This was a video for you. To align master for Samsung Galaxy, a 50 and feel free to ask in the comment section below. If you have any doubts about this product and buy it from Amazon doubt it, you will get a very good deal on this product.

Thank you for watching to subscribe. My channel bye, bye.

Source : Ashutosh Thakur