Mr. Samsung gear, s2 nitrogen. If so, this is how to fix it. The problem actually is from there are the credits. Now your watch, your watch is actually good. It should hold a charge, the problem, if, if there's blinks three times and goes out, it goes from green to yellow, right and just cuts right out.
The problem is you're charging piece. This is not good, so to fix that this is what you do. You're going to take this rubber piece out. You know, take a shot to something you can use a finger actually because it's not held down like that. Once you take that out these two screws holding this back piece down, so you're gonna.
Take those schools. I want one over there. Take those out I've already taken that out. So one after you don't take that out. Here's what you're going to do you're going to take, say a flat screwdriver or my flat screwdriver, and then try out this piece like from the side.
You know I mess it up it by plane, because I was playing it out, so you're going to ply it out. Okay, that's what you're going to do I'll show you in a second yeah, so once you play it out, this is what you're going to have seen this piece right, one into okay, so those two goes over the gold part right there. Those super touches those gold part, those gold part right there, the pads when it touches. That's when you get a connection over here to charge up your watch, if it doesn't touch you're, not gonna, have any connection so for that to work. You're going to have to let, so I'm trying to get a focus REA.
This is bad, so you're going to have to live those two one and two you're going to have to lift them up slightly. Let them come up a little. Do not bend all the way back, because if you do that, you're going to be just break it, you don't want to do that, so slightly lift it up, and then you should be good and just put it back together. It should be good. If not, this would also suggest you can do.
You can take a piece of soda right and then sort of from here to that side, so that play right there, you know, take a piece of soda, that's sort of like it real solid iron. Actually, so the lead you sort of from right here to the pad right there to the pad, and that should also work too, because we'll just need a contact from that. To that, that's what you need to be able to fix that problem, or so after I, just put it back together and I, was showing in a bit yes I just have to put it back together, put our screws back and connect your charger. There are the USB. We connect that he's going to blink, telling you what's good, and now all you have to do just to place your watch on it right there, it's charging it! So that's the only way you have to fix this.
If you're having a problem like that, just open the credit and then um, you should be good. You should just you know pop it up, so that if you have to and your charging problem should be solved all right- yes, I noticed a lot of frustration, but it's just like. Why would in charge, but that's a only way you have to fix it right do not buy a replacement charging dock. You don't need that. So just follow that on the steps that I showed, and it should be fine.
Thank you for watching give thumbs up. Share the video, yeah and I hope this helps you.
Source : EnoTech