Samsung Galaxy Z Fold2 5G Sopiguard Skin installation! Honeycomb Everything! By J. Williams

All right guys here we are again with another video on the Samsung Galaxy z fold, two, and now we're going to skin it we're going to skin it one of the best skins from one of the best companies and that will be selfie art. So I got three different colors here. I appreciate selfie guard sending these over for me to test out on the device and in this video we'll be applying the black version. Since my phone is obviously black, and I think that's going to set it off, I will now officially have grip, and that is something that's important yeah. I got this very expensive case right here and yeah. It is expensive.

However, we are going to put on a skin because I personally don't like to wear cases all the time. So here they are very nice. The blue, the gold, the black any of these can go on this device. I mean all colors look good with black, so we're going to take this off and uh when I go outside, I will still be able to wear my um case, but when I'm indoors I can rock with my selfie guard. So, like all things, you get a microfiber cloth, you get the skin, and you get a wet wipe, be mindful when you're using a wet wipe on devices that do not have a water resistant coating or anything like that IP rating be mindful of that.

Just try not to get it super wet, but this is needed because you want to get these clean. So I'm going to lift this up here dry, this off, get it all down in there nice and clean. I pretty much had it in that case the entire time uh these last few days. I just want to get it clean now. Furthermore, I typically will start with the camera hump the camera module.

So that's what I'll do all right? Let me get some stand up for this one all right. These aren't hard, but some people get really testy. I mean you're putting on scans. I actually did that one right for you guys to first go around now. Selfie guard again is my company of choice when purchasing, and I do purchase skins from Sophie- you know, but certain devices come out if they want to promote it.

I will promote it and I always ask so when certain devices come out, I know I'll have them and uh they might want some kind of promotion I'll do it and if they allow me to do so, I always appreciate it. So here's the part that I always have trouble with when applying scans. I don't always follow the instructions. These fancy instructions on how to line up and do this and you guys get so testy about it, and I do it my way anyway, because a lot of times when I'm putting these on, I can get it on the right way without doing anything. Fancy just like this see how I put that on there it's not rocket science, you just line it up and then boom the skin is on now.

In order to get these bumps, these bubbles out, you want to um push them to the edge. If you can, I always try to push them to the edge, but really that was kind of the only bubble, but I'm still going to heat it up, because I've got a curve right here that I need to make sure it stays down, because I will be using the case- and I have to admit folks. This is probably my best. Oh, here are the bubbles. Well, I can see him now.

I couldn't see him from that ankle honeycomb everything I like to pop these. If you can work them out like that work them out, and I have a soft edge squeegee. You still need to still need to heat this up, though I would suggest you heat it up to get the to make. It really sticks to the device uh, but there we go. That's looking a lot better, and again I'll heat this up.

If you don't have a soft edge squeegee like this, you can use uh this inside of one of a regular microfiber cloth, scan your devices. Folks, some people say: oh, you know you're putting a sticker on it yeah. You know this will prolong the look of your device. It'll help it with scratches it'll help it in so many ways, all right. That is boss mode right.

There gotcha there. It is all right, so maybe a few bubbles in there, but not enough to where a blow-dryer won't fix it and the blow-dryer just kind of seals it in, and sometimes you can put these on without even using a blow-dryer honeycomb everything, honeycomb everything, honeycomb everything, honeycomb everything, yeah honeycomb, everything, folks uh. That is just how I like it. I love the honeycomb skins and I just think they look fantastic. So this is now officially beast mode.

I got this lined up perfectly uh to my taste, so I'm going to heat this up with a blow-dryer uh, and then I'll go ahead and uh put it. What I tend to do is, I tend to it says, not to put it into a case, but what I do is I heat it up with a blow-dryer, and then I put it into a case and in my case open attendant. That's the only one I have is all. I need- and I leave that on for at least two days to help it form a shape to the phone. It helps it.

That's what I do, but when I have cases like for devices and I put a skin on I'll, pretty much put it in the case and leave it there for a couple of days. So now I'm going to heat this up, and we're going to be beast mode on here. Man is this not nice or what flawless I love it. She mans j, see in the next one. Take care.

Source : J. Williams