Samsung Galaxy Note 10 Lite Disassembly Teardown Repair Video By PBKreviews

You're watching the Samsung Galaxy Note, 10.1 and pop out the SIM tray nice go ahead and heat the back-up using a hairdryer or a blow-dryer, so you can heat up the adhesive underneath and loosen it up so to make it easier to pry off then use your plastic pry tool to work around the edges of the backplate and pry the backplate off. Here's a closer look at the backplate. So at this point you can see the s-pen or the stylus right here inside the housing pop that out and remove it. There's 15 Phillips screws. You need to remove, go ahead and remove those now that the screws are removed. We're gonna, remove the top plastic cover.

So here's the back of the plastic cover- and it looks like this- is the NFC antenna right here- makes a connection right there with the board those gold contacts right there. Now we're going to go ahead and disconnect the battery cable located right here, bump it up. Now, let's go ahead and disconnect the rest of the cables. You have a couple of wire cables located over here. Let's connect those power button.

The volume key cable is located right here that up we're in this connector front facing camera. There's one Phillips screw holding down the main board. It's located next to your earpiece, going to remove that. Oh, it can lift and remove the main board serious in burritos located over here. You also have some graphite film over here on the backside of the board.

Your cameras are connected here on this metal bracket, which you would need to pry out from the backboard to remove them. So the wide-angle camera, as well as the telephoto camera right here, both have image stabilization and your flash is located right here. Your ultra white camera over here does not have any more stabilization. The no 10 light has a fairly large 3d, copper, vapor chamber or located right here. You also have a liquid damage indicator located right here, this white sticker right there is underneath the SIM slot.

Now we're going to remove the bottom speaker assembly. So here's the speaker assembly, we're in this connect this cable leading from the main board to the sub board, which is a charger port down here. Your fingerprint reader is located right here, and it's connected over here on the charger port board. We're going to disconnect that there's also two Phillips screws holding down the fingerprint reader. This kind of screen cable miss to a wire cables as well.

You have one Philips screw and pulling on the charger port board go ahead and remove that here's a closer look at that all right now in order to remove the battery there's some strong, adhesive or glue underneath it, so you're going to have to eat the phone up a little, and then you're going to have to use something like a membership card or something plastic. That's thin enough to fit. Underneath the back of the battery you're going to have to work your way in and generate a profit battery. I'm telling you I took this apart once already, and it's pretty difficult. Here's the battery, so now you're left with the mid-frame this screen has attached to the mid-frame.

If you ever wanted to replace that you just have to heat the front of the phone and / half the screen, apply new adhesive put your new screen back over and just reverse the process. Yes, have your vibrator motor located here your earpiece right here, and you keep it for your power button and volume keys right here or now. I'm going to go ahead and reassemble the phone now once while your screws are back in place, apply new adhesive on the back of the foam, pier backplate popcorn in the for over power it on, and you're done. Thanks again for watching guys, I'll see you guys in the next video.

Source : PBKreviews