SAMSUNG GALAXY A20 Charging paused battery temperature too low | Samsung A20 Not Charging Problem By DM REPAIR TECH

Assalamu alaikum guys, how are you today? I will show video how to fix Samsung a20, not charging error charging temperature too high. When connect charger. You look on the screen red roof. If you got any a 20, something a 20, not charging like this problem, you can fix it easy if you, following my video step by step sometime same problem in case charging DC port or charging IC, but at 20. This problem charging error. Charging temperature too high is common problem.

One issue: the charging flex board now I'll show you step by step without changing DC or charging flex board any Samsung, how you can know the wires right problem and how you can fix it, easy after open phone unplugged battery, and we check it by meters. First, any charging problem after open phone. We need to check the battery output voltage. How much reading in the output voltage look the better PCC positive plan, our voltage, showing phone bolt, but it's not right voltage. Any android phone is showing output, voltage, 4.5 or 5 volts. Here it's reading right, 5 volts, but now we make this jumper 241 is ready.400 reading, because here not your right trading now we make one jumper from there to this point. To this point, I'll show you, after jumper, completed the right from where you need to jumper.

I make zoom knit shouldering well okay, so make I will make a jumper from this point after jumper completed. I will connect again charger then check again, output voltage reading now, right or like before same not right, ready. Furthermore, I think after jumper now showing right voltage right reading the output voltage charging voltage. Yes, it was before three point now, four point: six or four point: 4.5 4.5, it's been now working charging problems done now I'll connect setup all install all. Then I connect charger.

Wait few seconds yes, charging down.

Source : DM REPAIR TECH