Recovery Mode in SAMSUNG Galaxy XCover Pro – How to Use Recovery Features By HardReset.Info

Welcome Anthony is a Samsung Galaxy cover pro, and today I'll show you how to put the device into recovery mode. Now before we get started, we will need a cable that used for charging, and you will need to plug it into your computer, so that can be a MacBook or any kind of mac device or windows. It doesn't really matter from there once it's connected, let's shut off our device, so pull down notification panel, tap on the power key and select power off, and once the device turns off. What you want to do is hold power key and volume up both of them at the same time, so power volume up now, if you don't see the phone turning on again, which would be indicated by the galaxy logo, let go of the keys and start holding them again and there we go so from here. Once you see the galaxy logo, you can let go of the power key, but keep holding a volume up, and this will take you to the recovery mode. So in here you will use a volume keys to navigate and, as you can see, volume down goes down and up goes and power key will be used to confirm whatever is selected and going quickly over the options.

Here we can reboot the device, so this will take us back to android reboot to bootloader, which well puts us into a bootloader apply, updates from ADR SD card wave data. Let's be formatting on the phone web, cache partition, mount system view, recovery, logs, run, graphic test and local test and power off the phone along with repairing apps option. Like I said whatever you select, you will then confirm it with power key so because I want to leave this mode, I'm going to select reboot system now power key, and it will initiate a reboot taking us back to android and there we go as you can see. We are now back in android. So if you found this very helpful, don't forget to hit like subscribe, and thanks for watching.

Source : HardReset.Info