iPhone 6 vs Meizu MX4 Pro Fingerprint Scanner Test By Redskull

What's going on everyone, I'm Alex and in this video I'll, do a comparison between the fingerprint sensor on the maze mx4 pro and the fingerprint sensor on the iPhone 6. So, first, I'm going to set up a finger for each device, so I'm going to set up a finger from each hand, so I can press them in the same time. So this is how you set up the fingerprint on both devices. This is a bit faster on the iPhone. It seems it takes a bit longer on the maze, and it's done on the iPhone most of the setup anyways. Basically, the iPhone does this in two steps: the maze does it in one step and on the iPhone.

I have to put the sides of the finger which I did already on the memo, and it's almost ready, and it's done on both devices. So next I'm going to turn both of the devices off. So first just press the button once, and then you just slightly hold your finger over the scanner. So, let's do it again, so both of them in the same time as you've seen, I will try the wrong finger on both devices. So this is not the right finger so, as you can see, try again on both but the right finger.

It unlocks right away so as you've seen uh they're, both very fast. Basically, in the same time, it takes no time to do this, thanks for watching and don't forget, subscribe.

Source : Redskull