How to replace the Samsung Galaxy Tab A 10.1" Battery (SM-T580) By We Repair

Pauline walking we prepare, and so today I'm replacing the battery on an SMT 580 Samsung Galaxy, Tab 3 it doesn't you just lift. She doesn't turn on because the budget is important to charge, so we're going to swap this one out. It's a very great job. All you should need is Phillips screwdriver and something to pry between the edge of the frame and the back. So we'll stop the start at the bottom of the charge. Point is just usually easier to get in there.

You do have to put quite a lot of force just to get it started again. Plastic pry tools are usually the way forward here, but I find it very far with them. That's it just like that. Okay, as I say, you do have to put quite a lot of force into it once you've started it, it's pretty easy, going just be careful around the buttons. Don't you what I did there, and I do all the work you dumb, so I'm, just using me, plastic pry tool just to help me hold it, so it doesn't? Pop back in I should be able to just go around and unclip.

Now not sure what it started. It's not too bad. It's just getting going! So once you watch your way all the way around the back should just come free. It's like just done that. So no, but I back off, won't remove that up the way this little, so you guys can see.

What's going on so first thing we're going to do disconnect the battery, so just takes it away to take off that tree. So you've done that before we do anything else, and then we have to take these two cables off of the board just so we can get the battery out. So this one is the one to our front screen and this one is for charging so pop that one out, and then we've got sort of half a dozen screws and the battery will come out you, okay, so that's all disconnected, so it should just lift out at that point. So there you go my battery pack, so this one will now go in the bin, and we will get another one which has already been ordered just grab that okay, so new battery- and we just do the reverse- so really, really simple, so lift these two cables all the way country down in what your screws back first, where a magnetic screwdriver comes in very handy unless you touch the magnets on the side of the Samsung tablet. That is you.

That's that done so get these cables back in now in their get down, let's lift that all off of it push it back in the clip it down and lift this tab up, push the battery back in and clip it down. Then we'll just give it a test for argument's sake, and there we go one working Samsung tablet. So what we need to do now is just get a backpack on so again, I like to strangle the buttons in first just so, you're, not fiddling with anything while you're doing it so just flip into here and click all the way around like that, and that is literally it one Samsung tablet with a new battery now I hope these videos been useful to you. It has dropped us a like to subscribe to the channel and yeah we'll see you at the next video.

Source : We Repair