How to Enable Power Saving Mode on XIAOMI Mi 9T – Turn On Battery Saver By HardReset.Info

Welcome and following is a Xiaomi me 9t, and today I'll show you how to enable the power saving mode and get started. Let's pull down the notification panel and look for the toggle which, for me, it's located over here. So once you find it, you can simply tap on it. The battery saver and this will enable the power saving mode, which can also be determined by the color of the battery, which gets changed from like the whitish outlines to having the battery actually being a little more orangish color inside so and now during the power saving mode. Things like Wi-Fi and mobile data will be turned off after a period of inactivity. So when you lock the device like this and leave it for a couple of minutes, it will completely disconnect from Wi-Fi and mobile meaning that you won't get any updates uh.

That would require internet connection from any kind of app till you interact with the device again at which point the device will reconnect everything. Now you can also further extend your battery life by doing a simple thing like dropping your max brightness uh. Dropping it by halfway will increase your battery life, but by like two three hours depending on the device uh, I'm not exactly sure if we have any kind of counter here, so let's hold it and go to the battery, but it looks like there is no battery information. So that is another way you could increase your battery and also there is one more thing that I'll point out that will give you a little more battery life, which is disabling, unnecessary things like location here, if you're not using it as a GPS tracking right now, there's no point for it to be enabled uh Bluetooth if you're not using it again, disable it uh. If we go to next page, we have NFC again you're, not using it turn it off, and I think that's about it.

What you can disable to gain a little more battery life now going back to the actual battery saver, once you're done with it, you can tap on the toggle once more to turn it off, and this will bring the device back to the normal mode, and it's gonna function as you are used to. So. If you found this very helpful, don't forget to hit like subscribe, and thanks for watching you.

Source : HardReset.Info