Google pixel 3 XL how to replace back glass ( within 5 mins ) By all about phones

Hi, everyone I'll show you how to replace this back glass on your Google Pixel 3, as you can see right here, so we'll be working on those back laws. I'll show you how to replace it. All you have to do just hit it up all the way around all the way around the phone, so you have adhesive it's pretty much glued all the way around be really careful around this area, because your fingerprint sensor is attached right here and the cable goes from here like it's like around here, so be really careful once you stick something here, so try to remove this side like as much as here and then just lift it up to remove. Ok, let's start! Okay, if you need some more, you can adjust some more heat, I'm gonna start with something sharp like to get up and then go more up. You can use a knife just to get under if you can't get so just go, lift it up. I'll do it round, so you can see once you get up and up it'll go up pretty easy.

So just stick it here. It should go pretty easy! Okay, you only take something up here, so it doesn't get glue it again, just to keep it up and go all. Do it around here. All the way around be really careful here and that's coming off fully. Okay.

Now we can remove it and once you remove it, be really careful. Take it a little slower because your fingerprint, as you can see, it's still attached right here, so remove this whole thing, and I'm. Going to this, like this there's one more screwy, it's a Phillips, screwdriver you'll need to remove this screw. It's holding pretty much. It's like a cover over the cable.

Okay. Let's remove this thing. Okay, here's this crew, don't lose it and here's the plastic thing. It goes over the cable, it's pretty much holding it. So you remove this thing and then now you can just remove the cable.

They fingerprint. Okay, let's roll the phone! Now we have left to remove this fingerprint sensor. So let's heat it up a little, and it's not fitting okay. So just it's really hot comes up super easily! That's what okay came off as you can see, really easy. Okay, so now get a new bag gloss.

Install your fingerprint sensor back in sure attach pretty good. You can replace your camera gloss same way, hit it up and then remove it. I'll show you in the next video. If it's broken. Okay now attach the fingerprint sensor again, just like the way you removed it.

Stick it in and then now put the plastic cover over, and I'll put the screws back in right here: okay, let's get in okay screw if I'm back now use the new adhesive to stick it back into your phone, the back loss, the usually new ones, come with adhesive, so gold, your way around and then press all the way around. So it gets pretty good like around the edges press harder if it needs to be make sure you have touched, and that's how easy to replace it. Thanks for watching, if you like this video, please like and subscribe for more videos and then thumbs up for likes, I appreciate it and how good they enjoy your phone fixed, bye, bye.

Source : all about phones