Xiaomi Redmi Note 10 Camera Lens Glass Replacement By Geardo

Hi everyone welcome back to ghetto. Today we will show you how to replace the camera lens on the Xiaomi Redmi Note 10 mobile phones. To start. We need to have the right tools to proceed with the repair which you can find in the description first take out the sim tray and then the vacuum removal to remove the back cover. It needs to heat gently around the back of edges until the pastel adhesive becomes soft. For this we are using a heat gun, carefully work around on the reactor edges and apply heat to soften the glue on the back cover.

Alternatively, you can use a heat pad or hair dryer once the heating has completed, use a suction cup to create an opening between the frame and rear cover. Next insert a plastic car pry tool or something similar to cut the adhesive around the back cover next apply the heat on the camera lens and take out both camera lenses from the body. There are two camera lenses, replace the record, broken camera lens with a new unit and placed on the cover, make sure to apply adhesive to it and clean the surface. Next, before installing the main back cover make sure it has enough glue on it, if not use b7000 glue on your double-sided back cover adhesive. Finally, we are adding binding clips to tighten the rear car with the body.

If not, you can use some rubber bands and leave them for some time. Hope you have enjoyed the replacement guide. Let us know if you have any questions, please like share and comment on. Our videos hit the subscribe button for more videos.

Source : Geardo