Spigen Liquid Air Case for Google Pixel 4a (5G) Review By Wanderer001

Generally after you get your phone, and you get yourself a screen protector for your phone. The next thing that you look at is a case for your phone. Unless you are one of the people who just naked carries your phone. In my case, my wife got used to carrying her older phone without a case since it was easier to clean in the pandemic, but considering that she got a brand-new phone, we wanted to make sure that she had a case for it, hello. I am wonder001, and this is my review of the sign liquid air case for the Google Pixel 4 a5g. It is a minimalist case, meaning that the case just covers the back and a little around the sides.

It's not a multi-layer case. Furthermore, it's a single layer case. I will admit that sign has definitely gone to a minimalist design for their actual packaging of the case, compared to my old speaking case that I had what we're going to do is we're just going to take our pixel 4 5g, put it out frame there and talk about the actual sign case here. The case itself is made up of a CPU material, so that is thermoplastic polyurethane. All you need to know is think of it as it's a rubbery plastic material, so you will have a decent amount of flexing, but it does not collect dust as much as a true rubber case would to add to the protection that you're getting there are these air cushion pockets? They call them up in the corners and there you go.

You can kind of see one right there that is in all four corners, meaning that if it hits that little pocket of air will help to absorb the impact of your phone, you will notice that you have cutouts here in the back for your finger, because we want that ID right there, your camera accessory area up at the top for your 3.5 millimeter jack and your microphone and at the bottom for your speaker and your USB over on the side. Here you have your power and your volume rocker. You will notice that these do not offer full coverage, as you can see my table coming in through behind those. I will admit that does mean that dust will get in there a little easier. However, it also means that these buttons are much easier to depress than you would get on something like an otter box on the back here you can see you have a nice textured backing here, which gives it a nice look, but also it helps and adds to gripping you can see, because you also have that on the side and way down there at the bottom, you've got a little sign branding, and we'll take it to the top.

Where you see there is no actual texturing there, so it's only on the sides in the back. The one thing with the case here I will admit it is that it only comes in black. So if you like color cases, that might be a problem for you come around to the inside here. What we're going to do is we're going to take our pixel, and we're going to put it in there now. Part of the reason that I wanted to get a case for this phone in particular, is if we come around to the back there.

You can see that the camera bump is quite noticeable. So what we do the easiest way I've found is just start at the top and it just kind of slips in so there you go and look. The camera bump is now safely housed. Behind our case the fingerprint, I will admit it- has a nice recessed channel that just kind of leads you right to the fingerprint scanner. So that's great up at the top.

You will notice that it does have a nice wide cutout for your 3.5, so you can get a standard straight up and down or an l-shape and have no problems. There's our microphone at the bottom, nice wide cutout for the USB and our mic and speaker right there, so you're not going to have any problems again. The only thing that I say with these types of cases are that I wish that they had port covers, especially for the charger I had a pixel 2 case that didn't have a port cover and two years into it. I definitely had to clean out a lot of lint in there, not a problem, but here you see it does not add a lot of girths to the phone itself, which is nice, so it keeps it nice and thin so that you still have your slim pixel phone, and here you know click perfectly fine. Everything looks nice and the beauty of this type of case is they're really easy to get off too.

You can just kind of start down there, peel your corners and doing this around a camera, not the easiest, but peel your corners. There you go comes right out and the phone's starting up, and we'll stick it back in here, one more time, so there nice and quick and easy realistically, if you're, looking for a nice minimalist case that will protect your phone sign's liquid air case here might be what you're looking for one other thing to consider on the front. You'll notice that I do have a tag and visit shield screen protector on here, and this does not disturb it in any way, shape or form. It comes up around the corners very nicely, but the beauty of this is they're not high enough to prevent me from swiping, because there are some cases where you hit the side and that big lip stops. You dead in your tracks, but what this means is, if I put the phone down, the phone is raised enough that the screen is not directly touching the surface.

Likewise, if I do this, the camera array on the back is not directly touching the surface. So that is always why I like putting a case on, especially if you have a protruding camera array, so you can see all around. It's got a lip, but it's not a terrible lip and swiping very nice. I really am not going to lie like the texture. The textured backing does help, especially if you have kind of sweatier hands, and you need something to help grip.

So for those looking for this type of minimalist case design, how much is this going to cost you? Well that's the other beauty of it, since this is only really just a single layer case that you put on your phone. It's only going to set you back 15. I've had other sign products in the past and I will admit they do hold up very nicely. So, if you're looking for a minimalist protective case for your pixel 4 5g, I would highly recommend checking out the sign liquid air case again. If you can deal with the fact that it only comes in one color for the price, it is well worth it again.

Look you have that nice channel into your fingerprint and then your camera array is protected because it's recessed behind the case, but you'll also see just how close the case. Cutout comes to the camera array. So you're not left with a giant gap which I really appreciate with that being said, I have been wanderer001. If you have any questions or comments, please feel free to leave them in the area below and as always, thanks for watching, if you found this video helpful consider giving it a like, as that will help other people find the video as well. If you like what I'm doing here, you can always help fuel the next review by buying me a coffee link in the description below.

Last but not least, if you want to be notified, when I upload a new video, you know what to do. You.

Source : Wanderer001