Huawei P40 Pro Battery Replacement By Geardo

Hi everyone welcome back to Kyoto with another repair guide. Today we are going to show you how to replace the battery on quality 40 pro mobile phones to start. Let's remove the burr cover sheet gently around the phone until to pester that does he become soft. For this you can use a heat gun, heat pad or a hairdryer, carefully work around on edges, and once you feel the heating is enough. Inside the plastic car prior to and slowly Katia deceive around in between, you can use a suction cup to lick the back out always be gentle. When you pull up the Bacon, it may have a stable connected with the board.

In this case, there are no visible characters. Remove screws to take out the wireless coil and protect the boat looks like there are levers closed under all screws and lift the wireless coil with the protector board by using the preset, take off the board and undo the battery main and signal connect. The board cables to remove the battery tape up the Edna's ooh and put it gently from the right-hand side indicator, replace the new battery and a beatitude make sure the battery has seated properly connect all three connectors bed and place the predictor board with a wireless point, insert all screws back and replace the main back cover make sure it has enough glue on it. If not use, v7000 glue or double-sided baptism hope you have enjoyed the better placement guide on p44. It does not what you think please like share and comment on.

Our videos do not forget to subscribe. Thank you.

Source : Geardo