How to Enter Recovery Mode in WIKO Y60 – Open Recovery Mode By HardReset.Info

Here, I have we call y60, and today I'm going to show you how to enter recovery mode on this device. So, firstly, you will have to turn your device off and, after it turns off completely, you have to hold down combination of keys power, key and volume up at the same time, for a couple of seconds like this after the screen turns on you can release power key and keep holding only volume up and after a few seconds, you will end up in recovery mode. So here in the unit in the recovery mode, you can use volume keys to navigate and power key to select- and here you have such options as reboot system now, reboot to bootloader, apply, update from ADB, apply, update from SD card wipe data factory, reset wipe cache, partition, mount system view, recovery, locks, run, graphics, test, run local test and power off. If you want to exit this mode, just select the last option, power off and turn off your device, or you can select the first option, reboot system now and just restart it, which I'm going to do and that's it, thanks for watching. If you find this tutorial useful, don't forget to hit that like button and subscribe to our channel.

Source : HardReset.Info