Xiaomi Redmi 9 Teardown By Geardo

By Geardo
Aug 15, 2021
0 Comments
Xiaomi Redmi 9 Teardown

Hi everyone welcome back to gear. Today we will show you how to tear down or disassemble the Xiaomi Redmi nine mobile phones for repairs. To start, we need to have the right tools to proceed with the teardown which you can find in the description. First turn off the phone and take out the sim tray and then follow with the back car removal to remove the back cover, create a gap near the charger port using a picker and pry tool insert the picker and by using a plastic car pry tool, gently move around the phone to release the plastic clips on the frame, take out the rear cover and take out the main board protector frame by undoing screws, undo, 11 screws and lift the protector cover using a pry tool to remove the fingerprint flex and the camera lens applied little heat to soften the glue and to take out the camera lens push gently from behind and next from the left hand, side disconnect the battery LCD and main flex plugs and then the antenna. Now we can take out the main logic board on the front side of the logic board. Take out the camera protector frame and disconnect three rear cameras and the front camera, and there is one more rear camera, which is the depth camera, which connects from the back side of the logic board, disconnect it and remove the adhesive to separate the front camera and wide camera next applied the heat to take out the USB and sensor flex, cable on the body, be careful and slowly pull out the parts.

Next pull out the button press cable by using a tweezer. Let's move to the bottom section and undo seven screws to take out the protective cover, including the speaker, next disconnect the main flex, cable and antenna to take out the secondary, PCB unlock the screw and lift it by using a pry tool. The secondary PCB has the charger port and the headphone jack next apply little heat to take out the vibrato water. Finally, we can take out the battery by loosening the adhesive first release the tab and then extract it. Slowly and again, the same steps are on the other side hope you have enjoyed the teardown guide for repairs on Redmi nine.

Let us know if you have any questions, please like share and comment on. Our videos do not forget to hit the subscribe button. Thank you.


Source : Geardo

Phones In This Article


Related Articles

Comments are disabled

Our Newsletter

Phasellus eleifend sapien felis, at sollicitudin arcu semper mattis. Mauris quis mi quis ipsum tristique lobortis. Nulla vitae est blandit rutrum.
Menu