iPhone 8 Plus Screen Replacement Guide - RepairsUniverse By Repairs Universe

By Repairs Universe
Aug 15, 2021
0 Comments
iPhone 8 Plus Screen Replacement Guide - RepairsUniverse

iPhone 8 plus screen replacement, guide, warning you're performing this repair at your own risk. We claim no responsibility for any damages that might occur to perform this DIY repair. You will need a plastic triangle: opening tool, nylon, spider, SIM card ejection tool, fine tip curved tweezers precision, knife set, Phillips screwdriver, iPhone, pantalone, screwdriver, TRI point screwdriver, display assembly, adhesive power down your Apple iPhone 8, plus phone eject the NATO SIM card tray remove the two bottom three point: four millimeter pantalone screws located next to the Lightning connector, apply some heat and then use a precision knife to create enough space to insert a triangle opening tool with the opening tool slice through the adhesive and carefully D couple. The iPhone eight plus display assembly from the rear case, just like the iPhone 7 plus it opens to the side. The display assembly is still connected to the iPhone by cables along the middle right side. So don't try to remove it entirely, just yet remove the following: 4 Phillips screws securing the bracket that covers the battery display and home-button cables.

These screws are different sizes, so be sure to remember where they go with the bracket out of the way pry. The cables up from the logic board, remove the following to tripping screws that secure the bracket covering the upper component display cable, disconnect the cable and free the iPhone 8 plus display assembly from the phone remove the following 5 Phillips screws, followed by the metal clip they secure in place, easily extract. The stereo enabling speaker use the spider to help remove the tangled up iPhone, 8, plus front-facing camera cable assembly. It includes the front-facing camera microphone, proximity sensor and ambient light sensor, remove the following four tripping screws and then the metal bracket separating the solid-state iPhone 8 plus home button is simple, with only light adhesive on the cable and no delicate gasket remove the following Philips screw and then the five TRI point screws with no adhesive on the iPhone 8 plus LCD shield plate and the cables nicely managed, simply lift it away from the display assembly make sure to take a look at our other DIY smartphone and tablet repair. Tutorials, don't forget to subscribe to our YouTube channel like us on Facebook and follow us on Twitter.


Source : Repairs Universe

Phones In This Article


Related Articles

Comments are disabled

Our Newsletter

Phasellus eleifend sapien felis, at sollicitudin arcu semper mattis. Mauris quis mi quis ipsum tristique lobortis. Nulla vitae est blandit rutrum.
Menu