Huawei P50 Pro Plus 2021 - FINAL DESIGN and FEATURES!!! By Science and Knowledge

What's up guys, Shahbaz here, so the flagship Huawei P50 Pro was shown in a high-quality image. Huawei P50 Pro will receive a new rear panel design, and the camera system will be housed in two rings. and today, we are going to disucss this in detail. Please watch the full video content. A new image of the Huawei P50 Pro smartphone has appeared on the network, the presentation of which was expected back in February this year, but has since been postponed several times. The Huawei P50 Pro is expected to receive a new rear panel design and the camera system will be housed in two rings.

Depending on the model (Huawei P50, Huawei P50 Pro, or Huawei P50 Pro +), these rings will have a total of three to five image sensors. Finally, the Huawei P50 Pro + is equipped with a curved display on the sides, as well as a Penta camera: three modules are in the upper ring, two more are located below. All three models are equipped with front cameras embedded in the upper center of the display. The top two models are equipped with periscope cameras for high-quality optical zoom. It is expected that the Huawei P50 series will receive a triple main camera with the main module with a resolution of 50 megapixels, an optical format of about 1 inch.

Earlier it was reported that the Huawei P50 series will be equipped with an exclusive Sony IMX800 image sensor, the optical format of which will be close to 1 inch. The flagship model Huawei P50 Pro + will receive a liquid lens that will provide the highest focusing speed. The design of the front panel should also change - the screen frames will become even smaller, and the front camera will move to the center of the display. The Huawei P50, Huawei P50 Pro, or Huawei P50 Pro + are expected to be equipped with Kirin 9000L, Kirin 9000E, and Kirin 9000 SoCs respectively. The announcement of the Huawei P50 series of smartphones is expected this summer.

Source : Science and Knowledge