How to Enable Power Saving Mode in LG K61 - Save Battery By HardReset.Info

Welcome and phenom is a lg k61, and today I'll show you how to enable the power saving mode so to get started, hold down the notification panel and find the battery saver toggle, which is right here for me, and you can simply tap on it. This will by default turn on the extended mode. As you can see, it also gives you a message: what will do so? Vibrations are disabled black trunk activity and data restricted. This may result in some notifications and updates not showing- and this is so when you lock the device it will disconnect from Wi-Fi and you're roaming or whatever, like the internet, is from the provider, and it will only re-enable it when you wake up the device, so you will usually get your notifications whenever you interact with your device. Um and also max brightness will be at 90 percent tap on turn on, and it automatically turns on. You can probably see a notification right here that the battery saver is on, and certain cases also shows it on the battery.

But it looks like not in this case, and you can also see the toggle being now. Blue, so that is due to the fact that it's enabled now, apart from the extended mode, we also have the maximum and when you actually turn that on it does a little more so Wi-Fi Bluetooth location are all restricted. Night mode is on, so everything will be black vibration again, disabled all. All the previous things that were in the extended mode now are in the maximum, and additionally, there is more to it and when you switch it on, you will see that everything is now in black and from here you can leave it. There's no wallpaper anymore, that is to save the battery and, as you can see, um it kind of looks plain now, but it saves the most amount of battery, and once you are done with it, you want to tap on the battery once more hold it.

This will take us to the setting, so you can top on off from here and, as you can see now, it's back to normal now. For some reason, the buttons on the bottom are kind of working wonky. Whenever you disable this mode, I'm not really sure why. But you can tap on the arrow to go back, and then they will reappear. So that is how you enable disable the power saving mode and if you found this very helpful, don't forget to like to subscribe, and thanks for watching you.

Source : HardReset.Info