How to Use Camera Pro Mode in SONY Xperia 1 II – Camera Settings By HardReset.Info

By HardReset.Info
Aug 14, 2021
0 Comments
How to Use Camera Pro Mode in SONY Xperia 1 II – Camera Settings

Welcome here we've got Sony Xperia one two, and I'm going to show you the camera promoted this device. So at first we have to open the camera up, and can do it by two ways. The first way is the easiest one, because the Sony device gives us separate up only to the photo pro mode. So by tapping on this button we get quick access to it and can start photographing here. So this is the easiest way. We can also do it by using the standard camera app.

So by tapping on this button. Here we open the standard camera mode, and we have to change it by using this button in the left corner at the bottom. As you can see, we have access here to all the modes of this camera and the photo promote is at the first position. So when we tap on this, we can open it. So this is the same result as in the first way.

It's just more complicated way and also the important information is that the photo promote works here only in horizontal level. So let me change the settings of my camera to show you the better view. So here we are with sonic spray, 1 2 in the camera pro mode and as you can see, we have different settings here to manage and in the left corner here we can change the modes from the auto to p or s or m. So for now I'm going to stay on out. This is some kind of basic mode and, as you can see here, we have quick access to some of these settings and let me show you how it works.

The first one button here is the drive mode, so here we can pick the single shooting, continuous shooting or the self-timer. So for now I'm going to pick, for example, continuous routing and, as you can see to take a picture, we don't have any other button on the screen. So this only gives us the only button which is here only to take a photo. So I think this is really cool. As in the real camera and by tapping on this, for now, we can take a series of photo and, as you can see, this is how it works.

Of course, we can change it, for example to the self-timer with three seconds. So here we can change the delay of taking picture, and now, when I take a picture, it takes it with three seconds delay. So this is how it works here. So for now, I'm going to stay on single shooting and let's go to the next button here. This is the focus mode, so here we can pick the single shot, autofocus and continuous autofocus, because we are in auto settings here.

As you can see, the manual focus for now is locked, so this should be unlocked in other modes here. So let's stay on continuous autofocus. For now and now, let's move to the next button here we can pick focus area from white to the center, so this is how it changes here and now, let's go to this button. This is the flash here, so we can also, as in standard camera mode, pick out the flash uh the fill flash. So we, the flash, is available every time we take a picture red eye reduction function, so the soft flash.

We can pick the torch as you can see here, and we can turn it off like that. So this is how it works, and the last one button which is unlocked here in the auto settings is face detection. So here we can manage this, and we can turn it off and turn it on like that. So this these are the standard, auto settings basic settings here and now, let's change them out, we can do it by using this button in the left corner and let's go to DP mode here. So this is the program auto.

Here we can change the light of our picture. We can add just the basic one exposure compensation. So by going to the right, we can make our picture just more bright or more dark as we need. So this is how it works here, and this is connected with the ESO. So ESO helps us to control the camera sensitivity to light and, as you can see, we can manage this.

We can pick from 64 ISO and let's go to the end, to the 3000 and 200 of this or so. This is the pretty wide spectrum here, and this is how it changes hear hear, as you can see by tapping on this button in out with autofocusing, we got access to manual focus so for now, let's move from continuous autofocus to manual focus and, as you can see, we get access to this slider, and we can change the focusing like that. So this is how it works, and let's stay on this, and also as you can see, some of the functions are locked or unlocked here, for example, this is uh here, but we don't have here the time of taking pictures. So the shooter speed is locked here. As you can see, it is at just automatically clear two settings we adjust manually.

So this is how it works here we have also access to this button. This is the metering mode. We can pick the multimaterial center material and also spot mat hearing, and now, let's go to this button here by tapping on this. We get access also to white balance, which is not available in standard auto settings. So here we can manage this.

We can be cloudy daylight fluorescent light incandescent light shade, and we can add our own custom watermarks with when we want to apply this. We have to set white balance based in the center of the preview, so we have to set the white card place here to adjust it and apply done. So this is how it works here. For now, I'm going to stay on auto white balance, and now, let's go to the next mode by tapping again on this button in the left corner here to the s. So at the s the basic in the s is shooter speed, as you can see here it is.

We can change the time of taking picture and let's go to the beginning of the slider. It's its one and a thousand of seconds. So this is very short here, uh, this short time of taking pictures, and when we go to the end here we can take pictures maximum 30 seconds. So this is very one long. This gives us a lot of spectrum and possibilities to do with that.

So this is the parameter which I can change in as mode. So this is the shooter speed priority. We can also adjust here the exposure compensation and, let's focus on this- the ISO here, so the camera sensitivity to the two light is locked. So here this is half automatically mode like then in program auto. So in p we can add just the light, so exposure compensation and ISO and in s we can adjust the shooter speed and exposure compensation option and ISO is locked.

So I remember about it to work with this correctly and let's go to the last one mode here. This is the manual mode, so manual exposure- and here we can add just all of these settings like that. So this is how it works. We have the shooter speed. We have the ESO, also uh, when we add these two parameters.

At the same time, not to auto the exposure, compensation is locked so remember about this. This is not so pro as in the standard camera. Sorry in professional camera, uh, not in different camera. So here we can also add just other of these settings like that or white balance, for example uh. So this is available in all of these settings.

We can also when we adjust the settings. We can also lock them like that. So no one is, and nothing can disturb us when we have locked this. So this is how it works. Also, the important information that is available in all the modes is that we can change here in the left corner at the bottom, the lens.

So here we can manage the lenses of this camera. We can pick from 16 16, millimeters lens 24, millimeters, less and 70 millimeter slots, and by tapping on this we can also adjust and get access to the zoom. So this is really cool, and this is I have available in all of these modes here, as you can see. So this is how it works, and also we have access here when we tap on the disk. Here we get access to the camera leveler.

So this is helpful when you want to keep our photographic topic straight, and this is how it works here and, of course, to turn it off. We go again to the disk here, and it's gone now and let's move to the menu here we can also add just some settings that were in the quick preview here, and so this is the quick access to some of the settings and in the menu we can also adjust it and some more. For example, the aspect ratio is here than us. This is not in the quick uh settings here so here we can change the ratio of our picture. As you can see, we can pick from four and three sixteen and nine one and one and three and two, so this is also connected with the quality with megapixels, as you can see.

So, for example, one and one is the square ratio here, so this is how it looks like. So these are the shooting parameters. The drive mode was in the quick settings, as you can see here. Also, we can pick continuous, shooting and self-timer and single shooting. We can also change here, the settings to exporter and color, and also here we have, as in the quick access metering mode.

We can pick flash mode, we can add HDR mode, so improve our brightest and darkest areas of our picture, and also here we have access to soft skin effect, which is helpful when we're taking portraits- and let's go to the focusing here, we can also pick the focusing mode. As you can see, we can pick single shot, continuous and manual focus. So this is also available in this quick settings. We can pick also focusing area, so this is also in quick settings and face detection and also, let's move to the setup. These are the more advanced settings they are also available.

Most of them are also available in the standard camera. We can pick touch to add just focus and brightness or autofocus grid lines. So grid lines looks like that when it's turned on, we have these lines. This is helpful, for example, when we want to use the rule of 13 photography and making experiments with that. So this is not visible at the picture.

When we take the picture, as you can see and go to the preview, it's not visible here. This is only helped for us to making where there are pictures here and let's go again to this setup here we can also calibrate our lens, so we can fix the deviations of our lens, and also here we can pick where our photos are saved in internal or external storage. We can also pick here save location info. So when you want to save the place where we take a picture, we have to turn it on, and this is how it works at the last position. We have the rested settings here so when we turn on all of these settings and want to go back to the auto, we just simply tap on this and okay.

So this is how it works here, thanks for watching, subscribe to our channel and leave that thumbs up. You.


Source : HardReset.Info

Phones In This Article


Related Articles

Comments are disabled

Our Newsletter

Phasellus eleifend sapien felis, at sollicitudin arcu semper mattis. Mauris quis mi quis ipsum tristique lobortis. Nulla vitae est blandit rutrum.
Menu